Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in West Palm Beach?
Panel replacement in West Palm Beach typically costs $250 – $500 for a single section, and most single-panel jobs land near the middle of that range. A small dent or a couple of cracked windows bring it toward the low end, while a wide bottom panel on a two-car door pushes it higher. On a sectional door, you’re paying to swap one panel, not the whole door, so the final price tracks the panel size, the material, and whether the track or hinges also took a hit.
We work on garage doors and openers, nothing else. The panels we replace most often are on Clopay, Amarr, Wayne Dalton, and Raynor doors, but the diagnosis is the same on any brand: figure out why the panel failed before we quote the swap. That’s how a repair stays a repair instead of turning into a replacement you didn’t need. We offer free estimates on anything panel-related, so you’ll get a real number before anyone touches the door.
Panel Replacement Cost Breakdown (2026)
Here’s how the work breaks down for the West Palm Beach market. Prices assume a standard residential sectional door and one to two panels. If you’re comparing this against full-door pricing, our garage door repair and installation services cover the whole picture.
| Line item | Typical price range |
|---|---|
| Single steel panel replacement (labor and panel) | $250 – $400 |
| Insulated panel replacement | $300 – $500 |
| Two or more adjoining panels | $400 – $800 |
| Panel plus track realignment | $120 – $240 added |
| Panel plus new hinges and rollers | $110 – $220 added |
| Panel plus bent track section | $250 – $500 for the panel, plus track work |
| Matching a discontinued or special-order color | $350 – $550, longer lead time |
Most West Palm Beach jobs fall in the $250 – $500 lead range because a single panel plus labor sits there cleanly. What pushes a job toward the top of the range is insulation (common on Clopay and Amarr doors sold into this climate), custom colors, or a panel that has to be ordered instead of pulled from what we keep on hand. Two adjacent damaged panels bump you above the range, because you’re buying double the material and roughly double the install time. If the opener or springs are also failing, that’s a separate line: opener repair runs $120 – $320 and spring repair runs $180 – $340, and we diagnose both in the same visit so you get one honest quote instead of three.
What Affects Panel Replacement Pricing in West Palm Beach
South Florida is hard on garage doors in ways other markets aren’t. If you’re pricing this in October, the number will look different than it does in February. Here’s what actually moves the price.
- Salt air and humidity. Along the Intracoastal and out toward the island, salt air attacks steel panels and their fasteners faster than inland. We see pitting and rusted hinges on doors that are only a few years old near Flagler Drive, which is why we check fasteners and bottom rails before quoting a simple panel swap.
- Afternoon storm damage. Our summer squalls throw palm fronds and yard debris at doors. Backed-into or debris-hammered bottom panels are the most common replacement we do in season, and those bounce the door off its track more often than not.
- Panel style and material. A raised-panel steel section is the cheapest and most common. Long-panel or carriage-style doors cost more per panel, and insulated panels (which make sense for a west-facing door that bakes in the afternoon) add to the material price.
- Color match. If the original paint code is standard, we usually match it. Discontinued colors or custom finishes mean a special order from the manufacturer, which adds lead time and a little money.
- Whether the tracks or hinges got hit too. A dented panel often comes with a bent track or a cracked hinge. We fold that into the quote rather than surprise you with it later. Track realignment runs $120 – $240 and roller replacement $110 – $220.
- Door height and width. Single-car doors (8 to 9 feet wide) are cheaper than two-car doors (16 feet). The wider the section, the more material and the longer the install.
We can’t fix what we can’t see, so we always start with a look at the door’s full condition. Sometimes the panel is the only problem. Sometimes the panel is the symptom. Our panel replacement guide walks through how we tell the difference, and we build our quote around it.
Is It Cheaper to Repair a Panel or Replace It?
For a single damaged panel, replacement is almost always cheaper than a new door and is the right call most of the time. A panel swap runs $250 – $500, while a new door installation runs $700 – $2,200, so the repair clears the bar by a wide margin on a standard sectional door. Here’s the simple test we run on every job:
- Minor dent or cosmetic damage? Replace the panel. You’re in and out for near the low end of the range.
- Cracked or fogged window in the panel? Replace the panel or the glass insert, depending on the model. Most brands (Clopay, Amarr, Wayne Dalton, Raynor) sell the insert separately, which saves money.
- One panel out of alignment or bent from a backing-in? Panel plus maybe a hinge or track tweak. Still well under the cost of a new door.
- Multiple panels, warped framing, or a door that’s structurally tired? Once you’re replacing three or more panels, the math starts leaning toward a new door, and we’ll tell you so. We don’t push a door sale when a panel swap will do.
If you’re looking for a straight answer on what your specific door needs, call us at (833) 302-7392. Estimates are free, and we’ll tell you which way is cheaper before you spend a dollar.
How to Save on Panel Replacement
The biggest way to save is to catch the damage early. A dented bottom panel is cheap to swap now and more expensive later if water gets behind it and starts working on the door’s structure. Beyond that:
- Do one panel, not two. If only one section is damaged, replace only that section. We don’t upsell you on a full set unless the door actually needs it.
- Bundle it with an upcoming tune-up. If the door is due for a spring check or a roller refresh, doing it in the same visit saves the trip charge, and we already have the door apart.
- Keep the paint code. If you know the door’s original color or manufacturer, tell us. Standard colors are easier (and cheaper) to match than special orders.
- Ask about our free estimate. We’ll quote you the exact price before any work begins. There’s no reason to walk into a panel replacement without a firm number, and we don’t do “we’ll give you the price once we start.”
Need a hand today? Call (833) 302-7392 and we’ll get you scheduled. One call covers the whole job, from the panel order to the install and the opener check if you need it.
FAQs – Panel Replacement Cost
How much does garage door panel replacement cost in West Palm Beach?
A single panel replacement in West Palm Beach typically costs $250 – $500. Insulated panels or special-order colors push toward the top of that range, and multi-panel jobs run higher. Call (833) 302-7392 for an exact free quote on your door.
Can you replace just one panel on a garage door?
Yes. We replace one panel at a time on standard sectional doors all the time, and that’s the most common panel job we do. The catch is matching the color and style; if the original is standard, we source it easily. If your panel is out of production, we’ll tell you honestly and lay out the options. Free estimates keep the decision simple: (833) 302-7392.
Is it cheaper to repair or replace a dented panel?
Replacing a dented panel costs $250 – $500, while a full new door runs $700 – $2,200, so replacement of the panel is cheaper in almost every single-panel case. Once you’re looking at three or more damaged panels, a new door can start to make more sense. We’ll run the numbers for you, free, and tell you which is the better deal.
Why did my garage door panel fail?
In West Palm Beach, the most common cause is storm or impact damage (a backed-in car, a palm frond, yard debris in a squall), which typically costs $250 – $500 to fix. The other big one is salt-air corrosion along the coast, which eats bottom rails and fasteners. We diagnose the cause in the same visit as the repair, so the panel you replace doesn’t fail again for the same reason. Call us for a free look.
Can you fix my panel the same day?
Often, yes. Standard single-panel jobs frequently turn around the same day when we have the panel on hand, and we don’t charge extra to check. Special-order or discontinued colors take longer because the manufacturer has to ship the panel. Call (833) 302-7392 and tell us the door brand (Clopay, Amarr, Wayne Dalton, Raynor, and others), and we’ll tell you the realistic timing before you commit.
Do you service LiftMaster, Chamberlain, Genie, and Craftsman systems?
Yes. We work on the major opener brands (LiftMaster, Chamberlain, Genie, Craftsman) and the major door brands (Clopay, Amarr, Wayne Dalton, Raynor). Panel replacement and opener repair often go together, and we handle both in one visit so you’re not calling two companies. Call (833) 302-7392 for a free estimate on both.
Why a Specialist Handles Panel Replacement Better
Panel replacement looks simple until it isn’t. The panel has to match the door’s profile and color, the track has to be true, the hinges have to line up, and the opener has to lift the door evenly once the new section is in. A generalist handyman can swap a panel. What they often miss is why it failed, and a door that was hammered by a storm or eaten by salt air needs more than a cosmetic fix. We handle every stage of this work: the panel itself, the track and hinge alignment, the opener’s balance, and the door’s overall safety. When the panel is part of a bigger problem, our panel replacement service in West Palm Beach covers the full repair, and we’ll point you to the right next step if the whole door is the better buy.
Springs, cables, and the torsion system are a different animal. Those parts store enormous energy, and a spring or cable that lets go can cause serious injury. We don’t hand homeowners a set of instructions for that work, and neither should anyone else. If your panel has come apart because a spring failed or the door came off its track, that’s a job for a trained technician. Call us and we’ll make it safe before anyone works on the panel.
Getting a Real Number for Your Door
The fastest way to know your panel replacement cost is to have someone look at the door. We do free estimates, we work on the door you already have, and our whole shop is garage doors and openers. Call (833) 302-7392 and we’ll get you a firm number for your West Palm Beach home. Most single-panel jobs land between $250 and $500, and we’ll tell you exactly where yours falls before the work starts.
Pricing reflects the West Palm Beach market as of 2026. Langston Garage Door Repair offers free estimates – call (833) 302-7392.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Alejandro Martinez"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Angela Kim"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Daniela Morales